Source code for RsNgx.Implementations.Calibration.Ainput
from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from ....Internal import Conversions
from ....Internal.Utilities import trim_str_response
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class AinputCls:
"""Ainput commands group definition. 9 total commands, 5 Subgroups, 4 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("ainput", core, parent)
@property
def start(self):
"""start commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_start'):
from .Start import StartCls
self._start = StartCls(self._core, self._cmd_group)
return self._start
@property
def cancel(self):
"""cancel commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_cancel'):
from .Cancel import CancelCls
self._cancel = CancelCls(self._core, self._cmd_group)
return self._cancel
@property
def end(self):
"""end commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_end'):
from .End import EndCls
self._end = EndCls(self._core, self._cmd_group)
return self._end
@property
def umin(self):
"""umin commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_umin'):
from .Umin import UminCls
self._umin = UminCls(self._core, self._cmd_group)
return self._umin
@property
def umax(self):
"""umax commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_umax'):
from .Umax import UmaxCls
self._umax = UmaxCls(self._core, self._cmd_group)
return self._umax
[docs] def save(self) -> None:
"""SCPI: CALibration:AINPut:SAVE \n
Snippet: driver.calibration.ainput.save() \n
Saves the analog input adjustment. \n
"""
self._core.io.write(f'CALibration:AINPut:SAVE')
[docs] def save_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""SCPI: CALibration:AINPut:SAVE \n
Snippet: driver.calibration.ainput.save_with_opc() \n
Saves the analog input adjustment. \n
Same as save, but waits for the operation to complete before continuing further. Use the RsNgx.utilities.opc_timeout_set() to set the timeout value. \n
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
self._core.io.write_with_opc(f'CALibration:AINPut:SAVE', opc_timeout_ms)
[docs] def get_data(self) -> float:
"""SCPI: CALibration:AINPut:DATA \n
Snippet: value: float = driver.calibration.ainput.get_data() \n
Sets the analog input adjustment data. \n
:return: arg_0: No help available
"""
response = self._core.io.query_str('CALibration:AINPut:DATA?')
return Conversions.str_to_float(response)
[docs] def set_data(self, arg_0: float) -> None:
"""SCPI: CALibration:AINPut:DATA \n
Snippet: driver.calibration.ainput.set_data(arg_0 = 1.0) \n
Sets the analog input adjustment data. \n
:param arg_0: Measured value from DMM.
"""
param = Conversions.decimal_value_to_str(arg_0)
self._core.io.write(f'CALibration:AINPut:DATA {param}')
[docs] def get_date(self) -> str:
"""SCPI: CALibration:AINPut:DATE \n
Snippet: value: str = driver.calibration.ainput.get_date() \n
Returns the analog input adjustment date ('DD-MM-YY') . \n
:return: result: No help available
"""
response = self._core.io.query_str('CALibration:AINPut:DATE?')
return trim_str_response(response)
[docs] def get_count(self) -> int:
"""SCPI: CALibration:AINPut:COUNt \n
Snippet: value: int = driver.calibration.ainput.get_count() \n
Queries the number of counts performed for analog input adjustment . \n
:return: result: No help available
"""
response = self._core.io.query_str('CALibration:AINPut:COUNt?')
return Conversions.str_to_int(response)