from ...Internal.Core import Core
from ...Internal.CommandsGroup import CommandsGroup
from ...Internal import Conversions
from ... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class FaultCls:
"""Fault commands group definition. 4 total commands, 0 Subgroups, 4 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("fault", core, parent)
[docs] def get_state(self) -> bool:
"""SCPI: DIO:FAULt[:STATe] \n
Snippet: value: bool = driver.dio.fault.get_state() \n
Sets or queries the digital output fault. See 'operation modes' in Figure 'Overview of trigger IO system' \n
:return: arg_0: 1 Enables digital output fault. 0 Disables digital output fault.
"""
response = self._core.io.query_str('DIO:FAULt:STATe?')
return Conversions.str_to_bool(response)
[docs] def set_state(self, arg_0: bool) -> None:
"""SCPI: DIO:FAULt[:STATe] \n
Snippet: driver.dio.fault.set_state(arg_0 = False) \n
Sets or queries the digital output fault. See 'operation modes' in Figure 'Overview of trigger IO system' \n
:param arg_0: 1 Enables digital output fault. 0 Disables digital output fault.
"""
param = Conversions.bool_to_str(arg_0)
self._core.io.write(f'DIO:FAULt:STATe {param}')
[docs] def get_channel(self) -> int:
"""SCPI: DIO:FAULt:CHANnel \n
Snippet: value: int = driver.dio.fault.get_channel() \n
Sets or queries channel selection for the digital output fault source. See 'operation modes' in Figure 'Overview of
trigger IO system'. \n
:return: arg_0: 1 | 2
"""
response = self._core.io.query_str('DIO:FAULt:CHANnel?')
return Conversions.str_to_int(response)
[docs] def set_channel(self, arg_0: int) -> None:
"""SCPI: DIO:FAULt:CHANnel \n
Snippet: driver.dio.fault.set_channel(arg_0 = 1) \n
Sets or queries channel selection for the digital output fault source. See 'operation modes' in Figure 'Overview of
trigger IO system'. \n
:param arg_0: 1 | 2
"""
param = Conversions.decimal_value_to_str(arg_0)
self._core.io.write(f'DIO:FAULt:CHANnel {param}')
# noinspection PyTypeChecker
[docs] def get_source(self) -> enums.DioFaultSource:
"""SCPI: DIO:FAULt:SOURce \n
Snippet: value: enums.DioFaultSource = driver.dio.fault.get_source() \n
Sets or queries the 'operation modes' of the digital output fault source See 'operation modes' in Figure 'Overview of
trigger IO system'. \n
:return: arg_0: CC | CV | CR | SINK | PROTection | OUTPut If 'OUTPut' is selected, the 'fault output' will be active if the output of the selected channel is off.
"""
response = self._core.io.query_str('DIO:FAULt:SOURce?')
return Conversions.str_to_scalar_enum(response, enums.DioFaultSource)
[docs] def set_source(self, arg_0: enums.DioFaultSource) -> None:
"""SCPI: DIO:FAULt:SOURce \n
Snippet: driver.dio.fault.set_source(arg_0 = enums.DioFaultSource.CC) \n
Sets or queries the 'operation modes' of the digital output fault source See 'operation modes' in Figure 'Overview of
trigger IO system'. \n
:param arg_0: CC | CV | CR | SINK | PROTection | OUTPut If 'OUTPut' is selected, the 'fault output' will be active if the output of the selected channel is off.
"""
param = Conversions.enum_scalar_to_str(arg_0, enums.DioFaultSource)
self._core.io.write(f'DIO:FAULt:SOURce {param}')
# noinspection PyTypeChecker
[docs] def get_signal(self) -> enums.DioSignal:
"""SCPI: DIO:FAULt:SIGNal \n
Snippet: value: enums.DioSignal = driver.dio.fault.get_signal() \n
Select digital output fault signal type. \n
:return: arg_0: CONStant | PULSe CONStant An constant level trigger signal is sent out PULSe An output pulse of 100 ms trigger signal is sent out
"""
response = self._core.io.query_str('DIO:FAULt:SIGNal?')
return Conversions.str_to_scalar_enum(response, enums.DioSignal)
[docs] def set_signal(self, arg_0: enums.DioSignal) -> None:
"""SCPI: DIO:FAULt:SIGNal \n
Snippet: driver.dio.fault.set_signal(arg_0 = enums.DioSignal.CONStant) \n
Select digital output fault signal type. \n
:param arg_0: CONStant | PULSe CONStant An constant level trigger signal is sent out PULSe An output pulse of 100 ms trigger signal is sent out
"""
param = Conversions.enum_scalar_to_str(arg_0, enums.DioSignal)
self._core.io.write(f'DIO:FAULt:SIGNal {param}')